This past weekend I had the privilege to be a guest operator for the Radio Club of America on their special event station W2RCA, celebrating the 100th anniversary of the RCA. The station was co-located with the anniversary event in Washington DC, and I wasn't able to attend in person, so the operation was handled using remote PC access and VOIP software, similar to the setup which I described back in late 2007.
A problem with remote setups is that they require a fast Internet connection to work well; the primary challenge being the speed (or lack thereof) at which you can switch from receive to transmit and back again. Because the W2RCA special event station was scheduled to happen during the ARRL's November SSB Sweepstakes, it was decided that we would work the contest as W2RCA. Being in a contest situation meant that rapid TX/RX switching would be a must.
As it turned out the network connection between my home and the RCA event location wasn't quite fast enough for the furious pace of the contest. I was having a hard time getting the remote radio keyed quickly enough to bust the pileups. In some cases I would bust the pileup only to have the target station get frustrated because I wasn't coming back to him fast enough. Not good, not good...
Out of curiosity I turned on my home station and tuned to the same frequency as the W2RCA remote. I found that despite being separated by 2,500 miles I could hear the target station well on both radios! Not wanting to give up on the contest for lack of fast TX/RX switching I decided to try an odd twist on SO2R (Single Operator-Two Radios) setup. I activated transmit on the W2RCA remote station, muted my microphone, and plugged my headphones into my home station. Because SSB is carrier-less mode the remote radio would not transmit any power with the microphone muted.
The next time the target station called QRZ I unmuted my microphone and called him, and heard him come back to me on my home station! I was able to work several stations this way, although there were still a few challenges. First was the effort of keeping the frequency of ftwo radios in sync. Second was some of the stations I could hear clearly on my home station were outside the range of the W2RCA remote station. But in general it worked and was an interesting way to get around the slow TX/RX switching issue.
