K6BJ - 100 Years of amateur radio in Santa Cruz

The K6BJ amateur radio group is celebrating it's centennial on September 17th, and the Santa Cruz Museum of Art & History.  Information can be found at www.k6bj.org - come to the coast and celebrate a century of amateur radio tradition in Santa Cruz County!

• September 17, 11:00am - 3:30pm
• FREE Admission

Santa Cruz Museum of Art and History
705 Front Street
Santa Cruz, CA 95060

Workbench: Screw Terminal Adapters and Lever-Nuts

Having collection of connectors with screw terminals or lever clamps is very useful.  In a pinch you could do a field-repair on a headset, a rig interface, or resurrect a broken power cord with just a pocket knife and a screwdriver.  Here are some of my favorites:

DC Barrel Connectors - these can be used to make a quick disconnect (in lieu of a switch) or an extension cord.  If you just want the plug to match an existing device, you'll have to measure the outer diameter and inner pin.  Most of the time the outer dimension is 5.5mm, and the inner pin is either 1.7mm, 2.1mm, or 2.5mm.

2.1 x 5.5mm paired DC Barrel Connectors
http://amzn.to/2bEavs4

TRS "Phono" Connectors - these are really useful for building test cables or attaching a rig interface to the ADC port on an Arduino or ESP8266.  When you get to the mountain for a SOTA activation and realize your 5 year-old has yanked the end off your headphones, you'll want one of these.

1/8" (3.5mm) Tip-Ring-Sleeve "phono male" plug
http://amzn.to/2bjqfOS

1/8" (3.5mm) Tip-Ring-Sleeve "phono female" jack
http://amzn.to/2bj6JVy


For pocket tools, I prefer the Leatherman ES4 Squirt.  (http://amzn.to/2bEe5lV) It's a ham's dream tool, with a wire stripping jaw, knife, scissors, file, and a screwdriver bit that works well on these screw terminal adapters.

Other interesting stuff....

Wago Lever-Nuts - these are really useful for quick repairs or experiments where you want to easily connect and disconnect wires.  You can use them to quickly add sections of wire for tuning dipole antennas.  Lift the lever, slide in a wire (or wires plural) and drop the lever - done.  Made a mistake?  Lift the lever, change, drop the lever.  They'll handle up to 400 VAC and 20 amps, so they can be used for household electrical repairs or rig power cords.  I keep a handful of these in my field bag, some my glove compartment, and a bunch on my bench.  I prefer the newer 221 Series because the lever is wider and easier to manipulate.
http://amzn.to/2bEcNY3

BNC Female w/ screw terminal - these are 75 ohm, designed for CCTV installs, but for receiver testing or low-power transmit they'll work OK.  Be aware that some adapters like this actually have baluns, which you don't want for RF testing.
http://amzn.to/2bE9Yq1

RJ45 screw terminal plug - kinda bulky, but it's great for designing cables on a bench.  When I'm done and have a working design, I build a real cable using CAT6 and an RJ45 crimper or a punch-down terminal block.
http://amzn.to/2bJ6pxr

Talking Maker Faire and IMS2016 w/ George KJ6VU

This week's HamRadio360 podcast contains a segment where +Beric Dunn K6BEZ and I were interviewed by George KJ6VU about the Bay-Net amateur radio project at +Maker Faire and continues with discussion about the panel I moderated for the +IEEE International Microwave Symposium.  The audio for the panelist presentations is in the podcast, and the presentation PDFs are available online in my previous blog post.

Special thanks to Cale at HR360 (nee the +Fo Time Podcast) for covering this.

Field Day is here!

Every year the amateur radio community conducts Field Day - one part contest, one part public outreach event, one part campout & BBQ, and four parts awesome.  Bay-Net hosts a Field Day each year, operating as K6SRA.  For the past few years we've been setting up in a parking lot of the Almaden Quicksilver Park in San Jose CA - and this year is no exception.

For some Field Day is serious stuff - massive operations running 24 hours through the day and night, generators and amplifiers and stacked Yagi antennas, with operation coordinators whose sole purpose is to encourage the radio ops to work stations and log faster.  This does not sound like fun to me.  K6SRA Field Day often devolves into an impromptu technical session where the radios sit idle while we pore over the details of some homebrew project.  Our Field Day operation has jokingly been called "Hot Dogs and Radio - in that order".  For many of our members, busy as they are with work in the always-hectic Silicon Valley, Field Day is a chance to relax and catch up.

This year we plan to shift one of our HF stations from phone to digital on a station created via the excellent Raspberry Pi hacking skills of +Beric Dunn.  I figure the kids will like this better, since it's a keyboard and not a microphone they'll probably be less reluctant to get on the air.

Happy to join the Ham Radio 360 family!

I'm super excited that Cale Nelson K4CDN to has included my updated blog on list of syndicated sites for his new HamRadio360.com community.  I've worked with Cale in the past as a guest of his Fo Time Podcast, and he's a great guy - with content from George KJ6VU and others, I expect Ham Radio 360 to grow quickly, and I'm glad I can be a part of that.

Update; Hoping that the search robots will pick up the fact that http://sparqi.blogspot.com/ is now here - you'd think so since Blogger is Google..?

Kids and Morse Code

About three years ago my youngest daughter Tara took an interest in Morse Code.  I think she just liked the sound it made, but the way she sat there so intent when she was pretending to send was cute, so I took a video and posted it to YouTube.  It got picked up by a few amateur radio blogs, worked its way around the world, and as of today has just under 10,000 views.  In fact, it's my most watched video.  Not exactly the Dramatic Chipmunk, but still...  I had no idea it would be so popular.